The Vector Control of Three-Phase Salient Pole Synchronous Machines Supplied by Pulse-Width-ModuIated Voltage
J. Soltani and M. Fallah
Department of Electrical and Computer Engineering, Isfahan University of Technology
ABSTRACT” In this paper, computer simulation of a three-phase synchronous motor drive is described. This drive/system is supplied with a new type of pulse-width modulated voltage source inverter (PWM VSI) whose amplitude of the first harmonic, compared to a conventional sinusoidal PWM VSI, is increased by about 17% and whose amplitude of higher harmonics is also reduced inversely proportional to their orders. This system has low torque pulsations and approximately has a unity power factor at operation below the base speed. In addition, it has a dynamic performance very close to DC drives with quick dynamic response.
rotor-flux oriented reference frame
pulse width modulation
uniform sampling pulse width7. sinusoidal pulse width modulationmodulation
step trapezoidal pulse width8. robust modulation
rotor damper windings
Shoji, N., and Teruo, K.,lt Dynamic Control of Self Controlled Synchronous Motor Drive System,” IEEE Trans. on Indusüy Application, Vol. 1. IA-20, No. 3., pp. 598-607, May\June 1984.
Bendien, J. C., and Geuenich, J., “The State-Space
Analysis of Excitation Regulation of Self -Controlled Synchronous Motor Drive System,” IEEE Trans. on Power Electric Vol. 5, No. 3, pp.
281-288, July 1990.
Terens, L., Bommeli, B. J., and Paters, M. K., “The Cycloconverter Fed Synchronous Motor,” Brown Boveri Review, 4/5, pp. 122-132, May 1982.
Nakano, T., Ohsawa H., and Endoh, K., t’A High Performance Cycloconverter Fed Synchronous Machine Drive System,” IEEE Trans. on. L4, Vol. IA-20, No. 5, pp. 1278-1284, Sept./Oct. 1984.
Kaufman G. A, and Plunkett, A B., “Steady-State Performance of Voltage Source Inverter/Synchron
-ous Machine Drive Systems,” IEEE Trans. On Industry Application, Vol. IA-20, No. 4, pp. 753-761, July/August 1984.
Muir P., and Neuman, C., “Pulse Width Modulation
Control of Brushless Dc Motots for Robatic Applications,” IEEE Trans. Ind Electron, vol.
E-32, No. 3, pp. 222-229, Aug. 1985.
Goodman, E. D., “Dynamic Modeling to
Inverter-Fed Permanent Magnetic Synchronous Motors,” Proceeding Intemational Conference on the Evolution and Modem Aspects of $nchronous Machines, Switzerland Vol. 1, pp. 229-233, Aug.
Matsui, N., And Shogyo, M., “Transputer-Based
Harmonic Elimination PWM Control of Inverter
Drives,” IEEE Trans. On Ind. Applications, vol. 28, No. 1, Part 1 and 11, pp. 175-184, Jan./Feb. 1992.
Vas, P., Vector Control of AC Machines, Oxford Univ. Publication, 1990.
Bose, K., Power Electronics 8 AC Drive, Prentice -Hall, International, 1986.
Katsunori, T., ” A PWM Strategy for Reducing
Torqur-Ripple in Inverter-Fed Induction Motor,” IEEE Trans. On Ind. AppL, vol. 30, No. 1, pp.
71-77, Jan./Feb. 1994.
Katsunori, T., “Trapezoidal Modulating Signal for Three-Phase PWM Inverter,” IEEE Trans. On Inds.
Elec., vol. IE-33, No. 2, pp. 193-200, June 1986.